Also specified as: Push-Pull Roller Shutter
A manual roller shutter operated by push-pull, spring-assist or gear crank — the economical, no-motor rolling door for low-cycle and budget openings.
Simple, dependable hand operation with no motor cost — the economical shutter for low-frequency and budget-conscious openings.
The manual roller shutter (push-pull roller shutter) is operated by hand using a push-pull bottom rail, spring-assist lift or gear crank — no electric motor. That makes it the most economical rolling door for openings that cycle only a few times a day, for sites without power at the opening, and for budget projects where automation is not justified.
Spring-assist balances the curtain weight so a large shutter can still be lifted comfortably by hand, and a gear crank gives mechanical advantage for heavier curtains. RAX builds the manual shutter with the same proven curtains, guides and locking as the motorized range, and can add a motor later if your duty changes.
RAX-company facts on this page — materials, 100,000-cycle fatigue testing, certifications held, warranty and lead time — are from RAX Door Technology’s approved brand brief. Industry figures are marked [SOURCED] (with the source) or [ESTIMATE] (industry-typical, not independently verified) in the Basis column and are confirmed against your opening on the technical layout. Fire resistance (EI60/EI120) and wind-load class are project-specific capabilities we test and document per order — never blanket certificates.
Every door is engineered to your opening. The values below are the validated baseline; final figures are confirmed on your specification.
| Parameter | Specification | Basis |
|---|---|---|
| Operation | Manual push-pull, spring-assist or gear crank — no electric motor required. | RAX capability |
| Spring-Assist | Balanced springs offset curtain weight so large shutters lift comfortably by hand. | RAX capability |
| Gear Crank | Geared crank gives mechanical advantage for heavier curtains. | RAX capability |
| Economy | Lowest-cost rolling door option — no motor, control or wiring. | RAX capability |
| Curtain | Galvanized steel or aluminum slats to the opening and environment. | RAX capability |
| Locking | Slide lock, bullet lock or key lock in the end slat for security. | [ESTIMATE] |
| Upgrade | Motor-ready — a tubular or geared motor can be added later if duty changes. | RAX capability |
| Fire Rating | EI60 / EI120 capability — tested to EN 1634-1 and classified to EN 13501-2 per project (not a held stock certificate). | Per project |
| Cycle Life | 100,000 cycles validated in the RAX fatigue test lab; report and video ship with the order. Industry context: retail shutters ~10,000-20,000 cycles, industrial high-use shutters ~25,000-100,000+ cycles [ESTIMATE]. | RAX-measured / [ESTIMATE] |
| Safety Devices | Anti-pinch safety edge, bottom air-bag sensor and photo eyes; optional radar, geomagnetic and light-curtain sensing. | RAX capability |
| Operating Temperature | RAX products validated from −30°C cold storage to +50°C desert environments. | RAX-measured |
| Maximum Opening | Custom to your opening — feasible span confirmed by RAX engineers against wind class and drive sizing. | Per project |
| Color / Finish | Full RAL custom (common RAL9006 silver grey, RAL9010 white, RAL7016 dark grey, RAL5010 blue); wood-grain transfer, PVDF coating, anodizing. Surface: flat / ribbed / cassette / orange-peel. | RAX capability |
| Power Supply | 220 V / 380 V, 50/60 Hz — confirmed against the selected operator. | Per project |
| Certification | Held: ISO 9001:2015, CE (EN 13241, EN 12453), SGS material reports, Product Liability Insurance. Per project: fire rating EI60/EI120 (EN 1634-1); AS/NZS 4505 & UL counterpart data. | RAX-held / Per project |
| Order | Custom engineered to your opening, specification and RAL color; from prototype to container-load delivery. | RAX policy |
| Lead Time | Sample 7–15 days; standard container 12–20 days; custom first order 20–35 days, repeat 15–20 days. | RAX-measured |
| Warranty | Door body 2 years; operator/motor 3 years (servo motor 5 years). Free spare parts within warranty (DHL/FedEx 5–7 days). | RAX policy |
Spring balance or gear-crank ratio is matched to the curtain weight so the shutter is comfortably operable by hand; the manual hardware is confirmed on the technical layout.
Validated substrates, processed in-house on an auto PU foam panel line and CNC punching/bending centre.
Match the door to the opening duty — each card is one line.
Your installers get the full document set before the door ships.
Certificates we hold today, and the project-specific test data we arrange against the matching standard.
Rigorous 100,000-Cycle Fatigue Testing Protocols, Validated Galvanized Steel & Aluminum Alloy Materials, and Precision Servo-Drive Manufacturing — the proof behind every RAX shutter.
Large industrial doors from prototype to container-load delivery.
Every RAX shutter is built to your opening, your RAL color and your duty — from prototype to container-load delivery. Private-label production covers panel color, operator matching, packaging and manual translation, all under strict NDA.
From custom engineering to container-load delivery — the document set your local installers need.
Door body 2-year warranty · operator/motor 3 years (servo motor 5 years) · free spare parts within warranty, dispatched DHL/FedEx 5–7 days.
Yes. Spring-assist balances the curtain weight so even a large shutter lifts comfortably, and a gear crank gives mechanical advantage for heavier curtains. We match the spring balance or crank ratio to the curtain weight so the door is easily operable.
Yes. RAX manual shutters are motor-ready, so a tubular or geared motor can be added later if your cycle duty changes – the curtain and guides are the same proven components used on the motorized range.
A manual shutter is the most economical choice for openings that cycle only a few times a day, for sites without power at the opening, and for budget projects where automation is not justified. For frequent operation we recommend a motorized or high-cycle shutter.
We are a pure manufacturer and do not provide on-site installation. Every order ships with an English installation manual, wiring diagrams for your local installation team; operators are pre-set and tested before dispatch.
Held: ISO 9001:2015, CE to EN 13241 (industrial door) and EN 12453 (operator safety), with SGS material reports and Product Liability Insurance. Fire resistance (EI60/EI120) and the wind-load class are project-specific capabilities we test and certify per order against the matching standard – we never overclaim a blanket rating.
Yes. RAL panel colors, operator matching, packaging printing and manual translation (EN/ES/FR/AR/RU) are all supported, from an OEM sample to container-load branded production. Tooling records are archived up to 5 years with no extra tooling fee on repeat orders, all under strict NDA.
Sample 7-15 days; standard container 12-20 days; custom first order 20-35 days (repeat 15-20 days). Door body 2-year warranty, operator/motor 3 years (servo motor 5 years), with spare parts dispatched by DHL/FedEx within warranty.
Factory inspection report (speed, noise, insulation-resistance and visual tests), 100,000-cycle fatigue test video/report, FAI / pre-assembly photos, English installation manual + wiring diagrams, CE Declaration of Conformity with EN 13241 test report, and export packing (steel frame + pearl cotton + stretch film, packing list, traceable batch no.).
Send your opening size and cycle duty — we reply with a manual shutter proposal and lead time.
