Also searched as: Hygienic Dock Door · Stainless Steel Dock Door · Food-Grade Dock Door — Stainless Steel Hygienic Door for Food, Pharma and Cold-Storage Dock Openings
The RAX Washdown Dock Door is a hygienic sectional or hinged-panel door constructed from stainless steel (SS 304 or SS 316) for food-processing, pharmaceutical and cold-storage dock openings where frequent high-pressure washdown is required. Stainless steel construction resists corrosion from cleaning chemicals and high-pressure water, while smooth, crevice-free panel surfaces prevent bacterial harborage — meeting the hygiene requirements of HACCP, FDA-aligned and EU food-safety-regulated facilities [ESTIMATE].
Washdown-rated dock doors are specified with IP69K-rated operators and control enclosures (protected against high-pressure, high-temperature washdown jets) [ESTIMATE]. Panel joints are sealed, and the door is designed for easy cleaning with no ledges or pockets where residue can accumulate. RAX manufactures washdown dock doors to your opening dimensions in SS 304 (standard food-grade) or SS 316 (pharmaceutical / marine-grade corrosion resistance) — from prototype to container-load delivery order — with technical layout drawings for your local installer.
SS 304 (standard food-grade) or SS 316 (pharmaceutical / marine-grade) panels, frame and hardware — resists corrosion from cleaning chemicals and high-pressure water [ESTIMATE].
Motor and control enclosure rated IP69K for protection against high-pressure, high-temperature washdown jets [ESTIMATE]; operator remains functional after daily CIP (clean-in-place) cycles.
Smooth, crevice-free panel surfaces with sealed joints; no ledges or pockets for bacterial harborage; designed for HACCP-aligned facility requirements [ESTIMATE].
Hinged single-leaf or double-leaf swing-door configuration for smaller dock openings or positions where a sectional door is not practical.
SS construction and hygienic seals validated for cold-storage dock operation down to −30 °C; insulation core option for temperature-controlled docks.
English installation manual + technical layout drawings + wiring diagrams; operator pre-wired and bench-tested; FOB Tianjin or Qingdao.
Every unit is engineered to your dock. Figures marked [SOURCED] (with the source) or [ESTIMATE] (industry-typical, not independently verified for RAX) are market-reference values in the Basis column; your RAX unit’s final figures are confirmed on the technical layout and quotation.
| Parameter | Specification | Basis |
|---|---|---|
| Product | Washdown Dock Door — stainless steel hygienic door for food/pharma/cold-storage dock openings | RAX product definition |
| Door type | Sectional overhead or hinged-panel configuration; selectable per dock opening size and duty | [ESTIMATE] |
| Panel material | SS 304 (standard food-grade) or SS 316 (pharmaceutical / marine-grade); smooth, crevice-free surfaces | RAX capability (brand brief: SS 304/316) |
| Frame & hardware | Stainless steel frame, tracks, hinges and fasteners; no exposed carbon steel components | RAX capability |
| Operator rating | IP69K-rated motor and control enclosure; protected against high-pressure, high-temperature washdown jets | [ESTIMATE] |
| Opening size | Custom to your dock; typical single dock door 2,000–4,000 mm wide × 2,500–4,000 mm high | RAX capability; typical from industry context |
| Insulation option | PU foam or cold-room panel core for temperature-controlled docks; U-value confirmed per spec | RAX capability |
| Temperature range | Standard: −30 °C to +50 °C (SS construction validated) | RAX capability |
| Color / finish | Natural stainless steel finish (brushed or polished); no paint required | RAX capability |
| Safety features | Cable break device, spring break device, bottom edge photocell — EN 12453 aligned | RAX capability |
| Certification (held) | CE: EN 13241 + EN 12453; ISO 9001:2015; SGS material reports (SS grade certification); Product Liability Insurance | RAX brand brief |
| Order | Custom engineered to your exact opening, specification and RAL color | RAX brand brief |
| Lead time | Sample 7–15 days; standard container 12–20 days; custom first order 20–35 days | RAX brand brief |
| Warranty | Structure 2 years; motor/operator 3 years; servo 5 years; free spare parts within warranty | RAX brand brief |
Sizing note: Washdown doors are specified for food, pharma and cold-chain docks where hygiene is the primary requirement. SS 304 is standard for food-grade; SS 316 is specified for pharmaceutical or high-chloride environments. Send your facility hygiene standard and we confirm the right grade.
HACCP, FDA-aligned, or EU food-safety regulated? This determines SS 304 vs SS 316 and the panel joint sealing spec.
Daily CIP cycles or periodic washdown? IP69K operator rating is required for daily high-pressure washdown.
Width and height of the dock opening. Also confirm headroom and sideroom for track routing.
Ambient, chilled or cold-storage? Insulation core and cold-rated seals needed for sub-zero docks.
RAX supports full private-label production of the Washdown Dock Door: custom opening sizes, SS grade (304/316), branded operators, packaging printing and installation-manual translation (EN/ES/FR/AR/RU). Start with an OEM sample and scale to container-load branded production, all under strict NDA.
RAX’s held CE certification for the industrial door and operator safety scope — applies to the powered operator regardless of panel material.
Certified quality management across the whole factory, with SGS material reports (including SS grade certification) and Product Liability Insurance.
Washdown doors are specified in HACCP-regulated food and pharma facilities; RAX SS construction and hygienic panel design are compatible with HACCP-aligned requirements [ESTIMATE].
Ingress protection rating for high-pressure, high-temperature washdown; operator and control enclosure rated to IP69K for daily CIP environments [ESTIMATE].
SS 304 is the standard food-grade stainless steel, suitable for most food-processing and cold-storage docks. SS 316 offers higher corrosion resistance for pharmaceutical, marine or high-chloride environments. RAX supplies both — tell us your facility hygiene standard and we recommend the right grade.
Yes. RAX washdown dock doors use IP69K-rated motors and control enclosures, protected against high-pressure, high-temperature washdown jets [ESTIMATE]. The operator remains functional after daily CIP cycles.
Yes. SS construction and hygienic seals are validated to −30 °C. Insulation core options are available for temperature-controlled docks.
RAX washdown doors are designed to be compatible with HACCP-aligned facility requirements [ESTIMATE]. Smooth, crevice-free surfaces with sealed joints prevent bacterial harborage. Send your specific hygiene standard and we confirm compliance.
We are a pure manufacturer and do not provide on-site installation. Every order ships with an English installation manual, technical layout drawings and wiring diagrams for your local team.
Sample 7–15 days; standard container 12–20 days; custom first order 20–35 days. Structure 2-year warranty, motor/operator 3 years, servo 5 years, with free spare parts dispatched by DHL/FedEx within warranty.
Or email info@raxdoor.com
Send your dock opening dimensions, hygiene standard and washdown frequency — we reply with a door specification (SS grade, IP rating), technical layout drawings and lead time.
