The Fire Resistant Sectional Door provides rated fire compartmentation for openings that must resist fire spread between building zones — warehouse fire walls, plant-room enclosures, parking-structure separations and industrial process areas. RAX offers fire-resistant sectional door capability at EI60 (60-minute integrity + insulation) and EI120 (120-minute) ratings, tested to the EN 1634-1 framework.
Important: fire rating is a project-specific capability for RAX, not a blanket held certification. Each fire-rated door order is engineered and tested to the specified class with documentation provided for the project’s fire-safety file. For industry context, a CN-export industrial sectional door lists fire behaviour B2 per DIN 4102 (source: ecer.com) — a material combustibility classification rather than a full door-assembly fire rating. RAX’s EI-class capability addresses the full assembly (integrity and insulation) per the European EN 1634-1 test standard. Standard (non-fire-rated) panels use 40–50 mm PU foam with galvanized steel skins (0.4–1.5 mm).
RAX-company facts on this page are from the approved brand brief. Industry benchmark values are attributed to their sources (Hörmann via renrendoc.com; CN-export listings via ecer.com; EN standard scopes via antpedia.com / baijiahao). RAX product-specific test data (U-value, wind class, fire rating) is confirmed per project.
Custom width × height, RAL color and configuration. Large industrial doors from prototype to container-load, full flexibility on order quantity.
Validated against a 100,000-cycle fatigue testing protocol in our in-house lab.
ISO 9001:2015 and CE to EN 13241 / EN 12453, with SGS material reports.
English manual + wiring diagrams; operators pre-set before dispatch.
| Product | Fire Resistant Sectional Door (also: Fire Rated Sectional Door · EI60 Sectional Door · EI120 Sectional Door) |
| Category | Sectional Doors |
| Fire rating | EI60 / EI120 capability (project-specific, per EN 1634-1 framework). Not a blanket held certificate |
| Benchmark | CN-export listing: fire behaviour B2 per DIN 4102 (material class, ecer.com). RAX EI-class covers full assembly |
| Panel construction | Fire-rated core + galvanized steel skins (0.4–1.5 mm). Standard panels: 40–50 mm PU foam |
| Seals | Intumescent fire seals (expand under heat) + standard perimeter EPDM seals |
| Size range | Custom to your opening (custom engineered to your specification). Fire-rated sizes subject to test-report coverage |
| Torsion spring | High-cycle; 100,000-cycle fatigue validated |
| Power | AC 220–240 V / 380 V, 50/60 Hz. Fail-safe closing on fire alarm signal |
| Certification | CE EN 13241 / EN 12453 (held). Fire rating: project-specific to EN 1634-1 (capability) |
| Order | Custom engineered to your size and specification |
Specify the required fire rating from your building’s fire strategy: EI60 (60 min integrity + insulation) or EI120 (120 min). Confirm whether the rating applies to the full door assembly or specific panels.
Fire-rated doors require project-specific test evidence. RAX provides fire test documentation to EN 1634-1 for the specified configuration. Confirm documentation requirements with your local fire authority early.
Fire-rated sectional doors must close automatically on fire alarm signal. Specify the interface (dry contact, BMS signal) and confirm fail-safe closing speed meets your evacuation strategy.
Clarify whether the door cycles daily (requires high-cycle springs, 100,000-cycle validated) or serves primarily as a fire barrier (lower cycle duty). This affects spring and operator specification.
RAX supports full private-label production of the Fire Resistant Sectional Door: custom RAL panel colors, operator matching, packaging printing and installation-manual translation (EN/ES/FR/AR/RU). Start with an OEM sample and scale to container-load branded production. Custom molds, Tooling records are archived for up to 5 years — no extra tooling fee on repeat orders, all under strict NDA.
Fire resistance test method for door and shutter assemblies. Determines the EI classification (integrity + insulation duration). RAX fire-rated doors are tested to this framework (project-specific capability).
Product standard for industrial doors. Note: EN 13241 explicitly excludes fire/smoke door characteristics — fire rating is addressed separately under EN 1634-1.
Power-operated and mechanical safety still apply to fire-rated sectional doors in their daily-use function.
RAX offers EI60 (60-minute) and EI120 (120-minute) fire resistance as a project-specific capability, tested to the EN 1634-1 framework. This is not a blanket held certificate — each fire-rated order is engineered and documented for the specific project.
E = Integrity (resists flame/hot-gas passage); I = Insulation (limits temperature rise on the unexposed face). EI60 maintains both for 60 minutes; EI120 for 120 minutes. The classification is determined by testing the full door assembly per EN 1634-1.
No — EN 13241 explicitly excludes fire and smoke characteristics. Fire rating is addressed separately under EN 1634-1. RAX holds CE to EN 13241 for the standard door and provides fire test documentation as a project-specific deliverable.
Yes — fire-rated sectional doors can cycle daily. Specify high-cycle torsion springs (RAX validates to 100,000 cycles) and an appropriate operator. The door closes automatically on fire alarm signal regardless of daily use.
No — pure manufacturer. Ships with English manual, wiring diagrams (including fire-alarm interface). Fire seals pre-fitted.
Fire-rated doors are custom first orders: 20–35 days. Door body 2-year warranty, operator 3 years. Fire test documentation included in the delivery package.
Or email info@raxdoor.com
Send your opening size and duty requirements — we reply with a proposal and lead time.
