Also searched as: Bottom Seal · Rubber Seal Strip
Weather seals are the cheapest part of a door and the biggest energy leak: bottom astragal (T-bar) seals close the floor gap, side and top seals close the frame gaps. Industry materials are EPDM or TPE rubber chosen for long-term flexibility; cold-climate seals must stay supple well below freezing — low-temperature flexibility around -30 °C is the benchmark requirement [ESTIMATE]. Where a seal doubles as a safety edge on powered doors, the sensing function falls under EN 12978 protective-device design [SOURCED https://antpedia.com/standard/8377866-10.html].
RAX supplies silicone rubber seals as part of its standard material range, with EPDM/TPE options for OEM projects, and validates complete doors from -30 °C cold storage to +50 °C desert duty. Seals are profiled to your panel and frame geometry and ship with SGS material reports — matched to the panels and hardware from the same factory so compression and contact lines are engineered, not guessed.
EPDM/TPE usage, astragal/T-bar profile types and -30 °C flexibility benchmark are industry conventions [ESTIMATE]. EN 12978 relationship for safety-edge seals is a verified standards summary [SOURCED https://antpedia.com/standard/8377866-10.html]. RAX-specific claims are from the approved brand brief.
Custom width × height, RAL color and configuration. Large industrial doors from prototype to container-load, full flexibility on order quantity.
Validated against a 100,000-cycle fatigue testing protocol in our in-house lab.
ISO 9001:2015 and CE to EN 13241 / EN 12453, with SGS material reports.
English manual + wiring diagrams; operators pre-set before dispatch.
| Product | Weather Seal (also: Bottom Seal · Rubber Seal Strip) |
| Category | OEM Door Components |
| Size range | Bottom, side and top seals cut to your door width and frame profile; profile shape (astragal/T-bar, bulb, lip) matched to your panel system. From small repair lengths to OEM container quantities. |
| Materials | Silicone rubber seal (RAX standard material); EPDM or TPE options [ESTIMATE]; low-temperature flexibility to around -30 °C [ESTIMATE]; optional safety-edge sensing per EN 12978 [SOURCED https://antpedia.com/standard/8377866-10.html]. |
| Color / finish | Full RAL custom (common RAL9006 / 9010 / 7016 / 5010), wood-grain, PVDF, anodizing |
| Power | Not applicable — passive, unpowered component. RAX can supply matched operators, servo drives and smart controls from its full-category one-factory range. |
| Certification | CE EN 13241 / EN 12453; product-specific test data confirmed per project |
| Order | Custom engineered to your exact opening, specification and RAL color |
Bottom astragal/T-bar for the floor gap; side and top seals for frame gaps [ESTIMATE] — specify all three.
EPDM/TPE for standard duty, silicone for temperature extremes; target flexibility around -30 °C [ESTIMATE].
On powered doors, a sensing bottom seal must satisfy EN 12978 protective-device requirements [SOURCED https://antpedia.com/standard/8377866-10.html].
Profile must compress to seal without dragging the door — match to panel/frame geometry at technical drawing stage.
RAX supports full private-label production of the Weather Seal: custom RAL panel colors, operator matching, packaging printing and installation-manual translation (EN/ES/FR/AR/RU). Start with an OEM sample and scale to container-load branded production. Custom molds, Tooling records are archived for up to 5 years — no extra tooling fee on repeat orders, all under strict NDA.
Industrial, commercial and garage doors and gates — the harmonized basis for CE marking.
Safety in use of power-operated doors — force limits and test methods for operators.
Wind (EN 12424), thermal (EN 12428), fire (EN 1634-1) etc. confirmed per product during enrichment.
Weather seals are supplied as bottom astragal/T-bar, side and top seals [ESTIMATE] cut to your door width, in silicone rubber (RAX standard) or EPDM/TPE [ESTIMATE], with low-temperature flexibility targeted around -30 °C and optional safety-edge sensing per EN 12978 [SOURCED https://antpedia.com/standard/8377866-10.html]. Send your panel/frame profile and quantities; RAX quotes from single repair lengths to OEM containers.
We are a pure manufacturer and do not provide on-site installation. Every order ships with an English installation manual, wiring diagrams for your local installation team; operators are pre-set and tested before dispatch.
RAX holds ISO 9001:2015 and CE to EN 13241 (industrial door product standard) and EN 12453 (operator safety), with SGS material reports and product liability insurance. Components are engineered to help the finished door satisfy EN 12604 (mechanical aspects: strength, cycle durability, finger-pinch and spring/cable safety), and product-specific test data (fire, wind, thermal) is confirmed per project against the matching standard.
Yes. RAL panel colors, operator matching, packaging printing and manual translation (EN/ES/FR/AR/RU) are all supported, from an OEM sample to container-load branded production.
Sample 7–15 days; standard container 12–20 days; custom first order 20–35 days. Door body 2-year warranty, operator/motor 3 years (servo 5 years), with spare parts dispatched by DHL/FedEx within warranty.
Factory inspection report, 100,000-cycle fatigue test record, FAI / pre-assembly photos, English installation Manual + Wiring diagrams, CE Declaration of Conformity, and export packing (steel frame + pearl cotton + stretch film).
Or email info@raxdoor.com
Send your opening size and duty requirements — we reply with a proposal and lead time.
