Also searched as: Aluminum Insulated Slat · Roller Door Slat
Roller shutter slats set the door’s wind resistance, weight and thermal behavior. Industry practice: roll-formed or extruded aluminum shells filled with PU foam, with common cover heights around 40–77 mm; extruded (heavier) profiles are reserved for security duty and large widths, while foam-filled roll-formed slats serve standard insulated closures [ESTIMATE]. Slat selection is governed by door width and wind class — the wider the door, the stiffer the profile required [ESTIMATE].
RAX manufactures slats from aluminum alloy 6063-T5 profiles and galvanized steel sheet (0.4–1.5 mm) within a one-factory full-category range — slats, guides, springs, operators and complete doors — so OEM buyers can source the whole shutter kit under one QC system, one RAL color batch and one container. SGS material reports ship with every order.
Cover-height range 40–77 mm, roll-formed vs extruded usage and wind-selection logic are industry conventions [ESTIMATE] pending RAX datasheet values. RAX-specific claims are from the approved brand brief.
Custom width × height, RAL color and configuration. Large industrial doors from prototype to container-load, full flexibility on order quantity.
Validated against a 100,000-cycle fatigue testing protocol in our in-house lab.
ISO 9001:2015 and CE to EN 13241 / EN 12453, with SGS material reports.
English manual + wiring diagrams; operators pre-set before dispatch.
| Product | Roller Shutter Slat (also: Aluminum Insulated Slat · Roller Door Slat) |
| Category | OEM Door Components |
| Size range | Slat profile to your door width and wind class (selection guidance [ESTIMATE]); cover heights in the common 40–77 mm band [ESTIMATE]. Cut to length with end-lock/hanger provisions; small batches and full containers both supported (FCL & LCL). |
| Materials | Aluminum alloy profile 6063-T5 or galvanized steel 0.4–1.5 mm shell; PU foam fill for insulated variants [ESTIMATE]; full RAL color, anodizing or PVDF finish. |
| Color / finish | Full RAL custom (common RAL9006 / 9010 / 7016 / 5010), wood-grain, PVDF, anodizing |
| Power | Not applicable — passive, unpowered component. RAX can supply matched operators, servo drives and smart controls from its full-category one-factory range. |
| Certification | CE EN 13241 / EN 12453; product-specific test data confirmed per project |
| Order | Custom engineered to your exact opening, specification and RAL color |
Size the profile against door width and wind exposure — wider doors need stiffer (often extruded) slats [ESTIMATE].
Foam-filled roll-formed for insulated standard duty; extruded aluminum for security and large spans [ESTIMATE].
PU foam fill adds insulation and rigidity; check weight per m² against barrel and operator sizing [ESTIMATE].
Full RAL batch consistency, anodizing or PVDF — matched to guides and box covers in the same order.
RAX supports full private-label production of the Roller Shutter Slat: custom RAL panel colors, operator matching, packaging printing and installation-manual translation (EN/ES/FR/AR/RU). Start with an OEM sample and scale to container-load branded production. Custom molds, Tooling records are archived for up to 5 years — no extra tooling fee on repeat orders, all under strict NDA.
Industrial, commercial and garage doors and gates — the harmonized basis for CE marking.
Safety in use of power-operated doors — force limits and test methods for operators.
Wind (EN 12424), thermal (EN 12428), fire (EN 1634-1) etc. confirmed per product during enrichment.
Slats are supplied to your door width and wind class, in the common 40–77 mm cover-height band [ESTIMATE], cut to length with end fittings. Material is 6063-T5 aluminum or galvanized steel with PU foam fill for insulated versions [ESTIMATE]. Send your opening width, wind exposure and quantity; RAX confirms profile selection from prototype to container-load, full flexibility on order quantity.
We are a pure manufacturer and do not provide on-site installation. Every order ships with an English installation manual, wiring diagrams for your local installation team; operators are pre-set and tested before dispatch.
RAX holds ISO 9001:2015 and CE to EN 13241 (industrial door product standard) and EN 12453 (operator safety), with SGS material reports and product liability insurance. Components are engineered to help the finished door satisfy EN 12604 (mechanical aspects: strength, cycle durability, finger-pinch and spring/cable safety), and product-specific test data (fire, wind, thermal) is confirmed per project against the matching standard.
Yes. RAL panel colors, operator matching, packaging printing and manual translation (EN/ES/FR/AR/RU) are all supported, from an OEM sample to container-load branded production.
Sample 7–15 days; standard container 12–20 days; custom first order 20–35 days. Door body 2-year warranty, operator/motor 3 years (servo 5 years), with spare parts dispatched by DHL/FedEx within warranty.
Factory inspection report, 100,000-cycle fatigue test record, FAI / pre-assembly photos, English installation Manual + Wiring diagrams, CE Declaration of Conformity, and export packing (steel frame + pearl cotton + stretch film).
Or email info@raxdoor.com
Send your opening size and duty requirements — we reply with a proposal and lead time.
