Also searched as: Heavy Duty Industrial Track System · Industrial Door Track
Vertical track, radius and horizontal run guide every cycle of a sectional door. Industry convention: galvanized steel track in roughly 1.5–3 mm gauge, sized for 2″ or 3″ rollers, supplied as vertical + radius + horizontal sections [ESTIMATE]. Gauge and radius accuracy decide how quietly the door runs and how long rollers last — under-gauged track flexes, and a misformed radius chews up bearings.
RAX forms track on CNC punching/bending centers from galvanized steel sheet (0.4–1.5 mm substrate range) and nylon PA66 track material options, holding the radius geometry that matches our own rollers and hinges. Tracks ship with technical drawings and batch traceability, and because panels, springs, drums and cables come from the same factory, the complete running gear arrives as one matched kit.
Track gauge ~1.5–3 mm, 2″/3″ roller sizing and vertical/radius/horizontal layout are industry conventions [ESTIMATE] pending RAX datasheet values. RAX-specific claims are from the approved brand brief.
Custom width × height, RAL color and configuration. Large industrial doors from prototype to container-load, full flexibility on order quantity.
Validated against a 100,000-cycle fatigue testing protocol in our in-house lab.
ISO 9001:2015 and CE to EN 13241 / EN 12453, with SGS material reports.
English manual + wiring diagrams; operators pre-set before dispatch.
| Product | Door Track (also: Heavy Duty Industrial Track System · Industrial Door Track) |
| Category | OEM Door Components |
| Size range | Vertical + radius + horizontal track sets cut to your door height and layout, sized for 2″ or 3″ rollers [ESTIMATE]; standard and high-clearance/low-headroom geometries. From 1 door set to container loads. |
| Materials | Galvanized steel sheet (RAX substrate range 0.4–1.5 mm), typical track gauge ~1.5–3 mm [ESTIMATE]; nylon PA66 track material available; CNC-formed radius. |
| Color / finish | Full RAL custom (common RAL9006 / 9010 / 7016 / 5010), wood-grain, PVDF, anodizing |
| Power | Not applicable — passive, unpowered component. RAX can supply matched operators, servo drives and smart controls from its full-category one-factory range. |
| Certification | CE EN 13241 / EN 12453; product-specific test data confirmed per project |
| Order | Custom engineered to your exact opening, specification and RAL color |
Match track channel to 2″ or 3″ rollers [ESTIMATE] — mixing sizes is the most common specification error.
Heavier doors and high-cycle duty need thicker gauge (~1.5–3 mm typical [ESTIMATE]); state cycles/day.
Vertical lift, standard lift, low-headroom or high-lift — send the layout and we form the radius accordingly.
Track, rollers and hinges from one factory guarantees channel-to-wheel fit; RAX supplies all three.
RAX supports full private-label production of the Door Track: custom RAL panel colors, operator matching, packaging printing and installation-manual translation (EN/ES/FR/AR/RU). Start with an OEM sample and scale to container-load branded production. Custom molds, Tooling records are archived for up to 5 years — no extra tooling fee on repeat orders, all under strict NDA.
Industrial, commercial and garage doors and gates — the harmonized basis for CE marking.
Safety in use of power-operated doors — force limits and test methods for operators.
Wind (EN 12424), thermal (EN 12428), fire (EN 1634-1) etc. confirmed per product during enrichment.
Door track sets (vertical + radius + horizontal) are formed to your door height, layout and roller size — 2″ or 3″ per industry convention [ESTIMATE] — in galvanized steel of appropriate gauge (~1.5–3 mm typical [ESTIMATE]). Send your layout (standard/low-headroom/high-lift) and door weight; RAX supplies matched track, rollers and hinges from prototype to container-load.
We are a pure manufacturer and do not provide on-site installation. Every order ships with an English installation manual, wiring diagrams for your local installation team; operators are pre-set and tested before dispatch.
RAX holds ISO 9001:2015 and CE to EN 13241 (industrial door product standard) and EN 12453 (operator safety), with SGS material reports and product liability insurance. Components are engineered to help the finished door satisfy EN 12604 (mechanical aspects: strength, cycle durability, finger-pinch and spring/cable safety), and product-specific test data (fire, wind, thermal) is confirmed per project against the matching standard.
Yes. RAL panel colors, operator matching, packaging printing and manual translation (EN/ES/FR/AR/RU) are all supported, from an OEM sample to container-load branded production.
Sample 7–15 days; standard container 12–20 days; custom first order 20–35 days. Door body 2-year warranty, operator/motor 3 years (servo 5 years), with spare parts dispatched by DHL/FedEx within warranty.
Factory inspection report, 100,000-cycle fatigue test record, FAI / pre-assembly photos, English installation Manual + Wiring diagrams, CE Declaration of Conformity, and export packing (steel frame + pearl cotton + stretch film).
Or email info@raxdoor.com
Send your opening size and duty requirements — we reply with a proposal and lead time.
