{"id":3643,"date":"2026-09-10T13:36:32","date_gmt":"2026-09-10T05:36:32","guid":{"rendered":"https:\/\/www.raxdoors.com\/blog\/how-to-choose-high-speed-rolling-doors\/"},"modified":"2026-09-10T13:36:32","modified_gmt":"2026-09-10T05:36:32","slug":"how-to-choose-high-speed-rolling-doors","status":"publish","type":"post","link":"https:\/\/www.raxdoors.com\/ru\/blog\/how-to-choose-high-speed-rolling-doors\/","title":{"rendered":"\u041a\u0430\u043a \u0432\u044b\u0431\u0440\u0430\u0442\u044c \u043f\u043e\u0434\u0445\u043e\u0434\u044f\u0449\u0438\u0435 \u0431\u044b\u0441\u0442\u0440\u043e\u0434\u0435\u0439\u0441\u0442\u0432\u0443\u044e\u0449\u0438\u0435 \u0440\u0443\u043b\u043e\u043d\u043d\u044b\u0435 \u0432\u043e\u0440\u043e\u0442\u0430"},"content":{"rendered":"

Every second a busy doorway stands open, conditioned air leaves the building and dust, humidity, or cold can move the other way. On a threshold that cycles hundreds of times a shift, those seconds turn into real energy and downtime costs. Choosing high-speed rolling doors is not about buying the fastest model.<\/p>\n

A high-speed rolling door earns its place when the opening cycles often enough, separates two different environments, or takes forklift traffic all shift. The decision comes down to a short list of measurable variables, and each one has a threshold you can check before you commit.<\/p>\n

\"High-speed
A high-speed rolling door clears a busy warehouse threshold before the forklift reaches it.<\/figcaption><\/figure>\n

Opening Speed and Daily Cycle Rate<\/h2>\n

Count how many times the door opens on an average day, then add the peak days. Our high-speed rolling doors travel at 0.8 to 2.5 m\/s, while a standard roller shutter moves at roughly 0.1 to 0.2 m\/s. That gap buys back the open window, and it only pays off when the opening cycles often.<\/p>\n

Manufacturers commonly publish ratings of about 200 to 2,000 cycles per day for high-speed doors. A widely quoted planning rule is to specify 30 to 50 percent above your expected daily average. Undersizing that rating is the most common cause of overheating motors and premature drive wear. Some datasheets list up to 300 cycles per hour, and heavy-duty lines go higher.<\/p>\n

Counting is easier than it sounds. Watch the opening across one full shift, count the actuations, and scale that to a full day. A dock door on a busy morning can cycle far more often than a service corridor door, so measure the real opening instead of assuming an average.<\/p>\n

If a door opens a handful of times a day, the extra electronics rarely justify the cost. If it runs through most of a shift, the faster travel compounds across every cycle and a slow door becomes the bottleneck. That is why a high-speed door vs roller shutter<\/a> decision usually lands on speed for interior runs and steel for the perimeter.<\/p>\n\n\n\n\n\n\n\n
Door type<\/th>\nBest for<\/th>\nTypical speed<\/th>\nCycle rating (published)<\/th>\nExterior wind<\/th>\n<\/tr>\n<\/thead>\n
Fabric roll-up<\/td>\nInterior high-traffic openings<\/td>\n0.8-2.5 m\/s<\/td>\n200-2,000 cycles per day<\/td>\nBelow Class 5 in most specs<\/td>\n<\/tr>\n
Rigid hard panel<\/td>\nExterior openings and security<\/td>\n0.8-1.2 m\/s<\/td>\nLower end of that band<\/td>\nUp to Class 5 (EN 12424)<\/td>\n<\/tr>\n
Spiral rigid<\/td>\nExterior and cold climates<\/td>\n1.0-2.0 m\/s<\/td>\nUpper end of that band<\/td>\nUp to Class 5 (EN 12424)<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

Curtain Material and Thickness by Environment<\/h2>\n

Suppliers commonly quote a reinforced PVC curtain of 1.5 to 2 mm for interior high-cycle doors. The fabric is light enough to cycle quickly and flexible enough to survive a glancing forklift hit. A coated PVC curtain is the default for warehouses, food plants, and logistics hubs.<\/p>\n

Temperature is where PVC stops being the easy answer. Industry guidance commonly puts the brittle point of standard PVC near -20\u00b0C, so a cold storage or freezer opening needs a low-temperature curtain compound instead. Ask for the material rated for your lowest operating temperature, not for the ambient one.<\/p>\n

\n
Fabric roll-up<\/dt>\n
Reinforced PVC or polyester curtain rolling onto a drum; fast and self-repairing.<\/dd>\n
Rigid hard panel<\/dt>\n
Aluminum or steel panels with a PU foam core, commonly quoted 40 to 60 mm thick.<\/dd>\n
Self-repairing guide<\/dt>\n
A curtain that pops out on impact and re-threads on the next cycle.<\/dd>\n<\/dl>\n
\"Forklifts
Forklift traffic and palletized loads keep a warehouse roll-up door cycling across a full shift.<\/figcaption><\/figure>\n

When impact or insulation matters more than raw speed, a rigid panel takes over. Our rigid panels use aluminum alloy 6063-T5 or stainless steel SS304\/SS316 over a PU foam core. That build resists a heavier knock and holds a tighter line in wind. The wider range of types of high-speed doors<\/a> covers both families, and a high-speed PVC roll-up door<\/a> remains the most common interior choice.<\/p>\n

How Much Wind Load Does an Exterior Door Need?<\/h2>\n

An exterior opening needs a wind rating, not just a speed rating. Wind load resistance is graded under EN 12424, and industry guidance treats Class 5 as the reference point for exposed industrial doors. Our spiral rigid doors reach that class on the scale, and published specifications commonly hold sustained winds above 100 km\/h.<\/p>\n

For exterior work, many buyers move to aluminum roller shutter doors<\/a>, where slats and guides carry the wind load and the frame anchors for the chosen class. Our aluminum roller shutters run to a maximum opening width of 12,000 mm, with slats 0.8 to 1.5 mm thick. Fabric curtains need reinforced fabric and wind bars, and they still trail rigid slats outdoors. For most exposed positions, that trade is worth taking.<\/p>\n